Is a rugged 2400 Watts / 3000 VA full double conversion Rackmount
Uninterruptible Power Supply in a 2 Units chassis that is less than 50 pounds.
JOIN US TODAY! And be part of our selective customers.
3000 VA Standalone UPS
PowergridM Rugged Rackmount Shipboard Navy UPS – Rugged Rackmount COTS Power Conditioner
Part Number: PG3000-UPS
Rugged Rackmount Shipboard Navy UPS – 3000 UPS is a Rugged 2400 Watts / 3000 VA Full Double Conversion Rackmount Uninterruptible Power Supply in a 2U (3.48” High) Chassis That is 24” in Length Weighing in at Less Than 50 Pounds.
The PowergridM technology is implemented with a Load Balancing Interconnect (LBI) design that allows up to four (4) of the PowergridM 3000 units to be interconnected to create a 2400, 4800, 7200, or 9600 Watts Uninterruptible Power Solution. The LBI interconnects the inverter and power circuits in each unit allowing them to work together to provide a fully meshed, load balanced and uninterruptible power grid for the attached systems. Each attached UPS will provide its share of the demanded power while ensuring frequency and power synchronization with its attached neighbors. With Stacking and Power Sharing cables attached, this system provides N+1 redundancy. Rugged Rackmount Shipboard Navy UPS – Rugged Rackmount COTS Power Conditioner
MIL STD 461 UPS | MIL STD 810 UPS
EMI / EMC – PowergridM UPS system has been designed to comply with all the radiated emissions, susceptibility and conductive emissions requirements of the applicable sections of MIL STD 461F. The following is a list of methods used for controlling emissions: RE102 | CE102 | CS101 | CS114 | CS115 | CS116 | RS103 DESIGNED TO MEET
Environmental MIL-STD-810G: Humidity, Altitude, Sand and Dust, Shock and Vibration, Temperature.
Highlights
• Ruggedized 2U 2400 Watts / 3000 VA UPS weighing in at 50 Lbs.
• Available in 1/2/3 phase input power configurations.
• Stack and Interconnect Design for 2400/4800/7200/9600 watt configurations.
• Hot Swap Battery Modules @ 12 Lbs Each – 12+ Min Hold Time.
• Universal AC Input of 100-264 VAC and from 47 – 63, 400 Hz, and DC Input at 42 – 56 VDC.
• VAC Output Voltage of 120V 60 Hz / 230V 50 Hz.
• Dual Computer Controlled Inverter Design.
• SNMP Based Network for Power Management and Reporting.
• Over Voltage Capacity for Managed In-Rush and Start up Demands.
• Over Voltage and Over Temperature Protection Circuits.
• Lightning Protection with Common Safety Ground Connection.
1U 800 watts UPS – Standalone Stackable to:
800 watts UPS | 1600 watts UPS | 2400 watts UPS | 3200 watts UPS
1U 800 watts UPS – BackPlane Stackable to:
1600 watts UPS | 2400 watts UPS | 3200 watts UPS | 4000 watts UPS
1U 1000 watts UPS – Standalone Stackable to:
1000 watts UPS | 2000 watts UPS | 3000 watts UPS | 4000 watts UPS
1U 1500 VA UPS – Standalone Stackable to:
1500 VA UPS | 3000 VA UPS | 4500 VA UPS | 6000 VA UPS
1U 1200 watts UPS – Standalone Stackable to:
1200 watts UPS | 2400 watts UPS | 3600 watts UPS | 4800 watts UPS
1U 1500 VA UPS – Backplane Stackable to:
1500 VA UPS | 3000 VA UPS | 4500 VA UPS | 6000 VA UPS | 7200 VA UPS
1U 1200 watts UPS – Backplane Stackable to:
1200 watts UPS | 2400 watts UPS | 3600 watts UPS | 4800 watts UPS | 6000 watts UPS
2U 3000 VA UPS – Standalone Stackable to:
3000 VA UPS | 6000 VA UPS | 9000 VA UPS
2U 2400 watts UPS – Stackable to:
2400 watts UPS | 4800 watts UPS | 7200 watts UPS
-
• AC Input Voltage: 100 – 264 VAC, 47 – 63, 400 Hz.
(Single, Dual, and Three Phase options available).
• DC Input Voltage: 42-56 VDC (optional).
• Battery Backup: 12 minutes at 25C, 80% Load.
• Available Output Voltages: 120 or 230 VAC True Sine wave.
• Output Frequency: 50Hz or 60Hz.
• Harmonic Distortion: <2% with resistive load. • Output Power: 2400 Watts / 3000 VA (Volt Amps).
• Efficiency: 80%.
• Startup Time: <30 Seconds. • Status Monitoring & Reporting: SNMP (optional).• Physical Dimensions: 3.48”H/17.1”W/24”D.
• Cooling: Front to Rear based internal airflow.
• Weight: 50 Lbs.
• Altitude: 10,000 Ft Operating – 40,000 Ft Non-Operating.
• Temperature: – 20 to +50C.
• Humidity: 0-95% non-condensing.
• Fungus: In accordance with MIL-STD-810G.
• Sand & Dust: MIL-STD-810G (with optional filters).
• Vibration: MIL-STD-810G.
• Functional Shock: MIL-STD-810G – Test Reports Available. -
Welcome to PowergridM Download Center. Find the latest downloads and documentation for our product line, including: UPS Mechanical Drawings, Cut Sheet, Data Sheet and 3D Renderings.
Fill this form with your contact information, the product you are interested in and the required file. Submit your information, and one of our experienced representatives will email you the required files as soon as possible.
If you have more questions concerning our Product Line or Download Center, please call our office today! We will be glad to help you.1 (813) 996-2583
For more information Contact Us